Whole-Home Rewiring in Greater Atlanta

An electrical wiring upgrade is the replacement or addition of circuits, connections, and often the service panel so your home safely supports modern power needs and current electrical code. Most upgrades are needed because older wiring lacks proper grounding and protection, or because added load from renovations and new appliances strains the system. The work typically pairs new grounded circuits with a right-sized panel and safety devices like GFCI/AFCI. We perform “Comprehensive home safety inspections” and “Pinpoint diagnostics,” followed by “Transparent quotes for repairs or full rewiring.” Our team coordinates permits and code compliance, and we complete these projects for homeowners throughout the Emory Village area.

Consider an upgrade if you notice any of the following:

• Frequent breaker trips or lights dimming when appliances start
• Warm or discolored outlets/switches
• Two-prong outlets, mixed aluminum/copper branches, or cloth-sheathed cable
• Plans for EV chargers, heat pumps, or a new kitchen

If you smell burning or see arcing, shut off the affected circuit and call an electrician.

Updated: 2026-02-12

Need help in Emory Village, GA? Call (404) 947-6851 or book online.

Rewiring a house is usually priced by total project scope, not a dependable per-square-foot rate. Most of the cost is driven by how accessible the wiring is and whether your electrical panel or service needs an upgrade. Electricians confirm pricing after an on-site evaluation and code review, and you should expect a clear, upfront written estimate before work begins. We price these projects locally as well, including homes in and around Tucker.

Key factors that drive price:

• Access conditions (open framing vs. plaster, crawlspace/attic reach)
• Panel or service upgrade requirements and load calculations
• Number of new circuits, outlets, GFCIs, and lighting added
• Code corrections, permits, and wall/ceiling patching needs
• Occupied vs. vacant home and protection/restoration time

If only a few circuits are unsafe, targeted rewiring can be more cost-effective than a full rewire; when hazards are widespread, a staged or whole-home rewire is typically the right call. Opening walls during planned renovations often reduces labor because cable runs are exposed. Never rely on a square-foot shortcut for a safety-critical project; schedule a licensed inspection before budgeting.

Updated: 2026-06-17

Need help in Tucker, GA? Call (404) 947-6851 or book online.

A complete house rewire is priced per home based on scope, so final cost is confirmed only after an on-site inspection and a written quote. The biggest cost swings come from home size and how easily new cable can be routed through existing walls, plus whether the electrical panel needs a capacity upgrade. Many homes don’t require every wire replaced; targeted circuit rewires or panel work can solve safety and capacity issues. We begin with comprehensive home safety inspections and pinpoint diagnostics with infrared and circuit tracers to define scope and avoid surprises. Our team handles permits and local code coordination for a compliant project. We routinely complete permitted rewiring in the Emory Village area. We provide “transparent quotes for repairs or full rewiring.” A small technician truth: in older homes, usable attic and crawlspace paths can reduce labor more than any single material choice.

Typical factors that change price:

• Square footage and number of circuits served
• Panel upgrades or new service-entrance work
• Wall/ceiling access and any plaster or drywall remediation
• Code-driven additions (GFCI/AFCI, surge protection, required smoke/CO)

Schedule a licensed electrician to map circuits and open a few sample locations before you set a final budget.

Updated: 2026-02-12

Need help in Emory Village, GA? Call (404) 947-6851 or book online.

The cost to rewire a full house is set after an on-site electrical assessment, since pricing varies by scope and condition. In practice, the biggest drivers are how much wiring must be replaced and whether the system needs capacity upgrades for today’s loads. Many homes only need targeted circuit rewiring instead of a full tear-out, which can lower cost and disruption. Our team completes code-compliant rewires across the Atlanta area, including projects near Tucker. Aardvark Electric provides upfront, written pricing after inspection.

Key factors that change pricing:

• Square footage and number of circuits to replace
• Need for a new service panel (e.g., moving from 60A to 200A)
• Wall/ceiling access and finish work needs
• Adding protection and devices (GFCI/AFCI, whole-home surge protection, smoke/CO upgrades)
• Integrations like EV charger readiness, generator tie-ins, and lighting controls

For safety, turn off any circuit with burn marks, odors, or arcing sounds until a licensed electrician inspects it.

Updated: 2026-06-10

Need help in Tucker, GA? Call (404) 947-6851 or book online. “Filip worked long past quitting time to get a new panel installed same day… honest and transparent.” — Filip’s customer

Replacing knob-and-tube wiring is priced after an on-site assessment because total cost depends on how much must be rewired, how accessible the runs are, and any required upgrades. The biggest driver is the scope of new circuits versus existing, plus how difficult it is to fish cable through finished walls and attics. We rewire older homes throughout the Kennesaw State University area with code-compliant solutions and clear, upfront estimates.

Key factors that change price:

• Full vs partial rewire and the number of circuits replaced
• Panel work (for example, moving to a new breaker panel or 200-amp service when needed)
• Adding grounded/GFCI outlets, dedicated circuits, or whole-home surge protection
• Access conditions and patching needs after fishing wires through plaster or tight spaces

Most homes with brittle insulation or ungrounded runs merit full replacement rather than piecemeal repairs; treat any burning smell or scorch marks as urgent and switch off the affected circuit. Schedule an on-site evaluation to receive a firm, written price before any work begins.

Updated: 2026-07-01

Need help in Kennesaw State University, GA? Call (404) 947-6851 or book online. "We would definitely highly recommend Aardvark electric and especially Ellie and his team." — Crystal C.

House rewiring cost per square foot isn’t a reliable or standard figure; Aardvark Electric, Inc. prices whole-home rewiring per project after an in-home evaluation. The largest cost drivers are the home’s layout and access, followed by panel capacity and any required code updates. After inspection, we provide upfront per-job pricing and review options before work begins. Our electricians quote rewires across the Atlanta area, including homes in Oak Grove, using the same transparent approach.

Key factors that change the price:

• Panel upgrade or subpanel requirements
• Access through walls, attic, or crawlspace and wall type (plaster vs drywall)
• Number of new circuits, GFCI/AFCI protection, and outlet/switch replacements
• Add-ons like whole-home surge protection, generator readiness, or EV charger wiring

For an accurate quote, schedule an in-home assessment so a licensed electrician can verify circuit loads, wiring condition, and permit needs.

Updated: 2026-09-29

Need help in Oak Grove, GA? Call (404) 947-6851 or book online. “We would definitely highly recommend Aardvark electric and especially Ellie and his team.” — Crystal C.